Product Overview
The LVR-1 Line Verification Relay is useful on analog phone lines and extensions that do not have a method of monitoring the status of the idle phone lines. Phone lines can go out of service at any time and without any warning. You could be paying monthly fees for phone lines that are not in service and not realize it. The LVR-1 can be a real money saver.
The LVR-1 Line Verification Relay monitors the voltage on an analog phone line. When that voltage goes below 2 volts for a programmable time, an on-board relay is activated. When the voltage of the phone line goes above 2 volts for the same programmable time, the relay is deactivated. Selectable times are 5, 10, 15 and 20 seconds. By using a timer, the LVR-1 makes sure that the line is dead before actuating the relay.
The LVR-1 is powered by an included 12 volt DC power adapter and has either a RJ-11 jack or a terminal block for connection to the phone line.
General Information
Name : Viking LVR-1 Line Verification Relay , Viking Electronics
Category : Intercom & Entry Accessories
UPC Code : 615687227727
Country of Origin : United States. Country of origin is subject to change.
Specifications
General Information
ADI Part Number : VK-LVR1
Brand Name : Viking
Interface : RJ-11
Manufacturer : Viking Electronics, Inc
Manufacturer Part Number : LVR-1
NDAA Compliant : Yes
Product Model : LVR-1
Product Name : Line Verification Relay
Product Type : Relay
Physical Characteristics
Application/Usage : Alarm System, Area of Refuge, Emergency Phone, Entry System
Depth : 1.38" (35.05 mm)
Depth (mm) : 35.052
Form Factor : Wall Mount
Height : 4.38" (111.25 mm)
Height (mm) : 111.252
Width : 2.97" (75.44 mm)
Width (mm) : 75.438
Power Description
Minimum Operating Voltage : 12V DC
Miscellaneous
Additional Information : <p>Country of origin: United States. Country of origin is subject to change.</p>
Package Contents : <ul> <li>Line Verification Relay</li> <li>Power Supply</li> <li>Wall Mount Housing with (2) #6×3/4 Panhead Screws</li> </ul>
TAA Compliant : Yes
